Quote:

This is what i found. Unsuccessful Attempt script file: Script started on Wed Aug 4 21:07:33 2010 ]0;~ Administrator@xpvm4dev ~ $ exit ssh -vvv Administrator@9.120.96.188 OpenSSH_5.4p1, OpenSSL 0.9.8m 25 Feb 2010 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to 9.120.96.188 [9.120.96.188] port 22. debug1: Connection established. debug1: identity file /home/Administrator/.ssh/id_rsa type -1 debug1: identity file /home/Administrator/.ssh/id_rsa-cert type -1 debug1: identity file /home/Administrator/.ssh/id_dsa type -1 debug1: identity file /home/Administrator/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.4 debug1: match: OpenSSH_5.4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.4 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer ]0;~ Administrator@xpvm4dev ~ $ exit exit Script done on Wed Aug 4 21:07:45 2010 ------------------------------------------------------------------------------------ Successful script file: Script started on Wed Aug 4 21:07:52 2010 ]0;~ Administrator@xpvm4dev ~ $ exit ssh -vvv Administrator@9.120.96.188 OpenSSH_5.4p1, OpenSSL 0.9.8m 25 Feb 2010 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to 9.120.96.188 [9.120.96.188] port 22. debug1: Connection established. debug1: identity file /home/Administrator/.ssh/id_rsa type -1 debug1: identity file /home/Administrator/.ssh/id_rsa-cert type -1 debug1: identity file /home/Administrator/.ssh/id_dsa type -1 debug1: identity file /home/Administrator/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.4 debug1: match: OpenSSH_5.4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.4 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa-cert-v00@openssh.com,ssh-dss-cert-v00@openssh.com,ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 130/256 debug2: bits set: 497/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 9.120.96.188 filename /home/Administrator/.ssh/known_hosts debug3: check_host_in_hostfile: host 9.120.96.188 filename /home/Administrator/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '9.120.96.188' is known and matches the RSA host key. debug1: Found key in /home/Administrator/.ssh/known_hosts:1 debug2: bits set: 497/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/Administrator/.ssh/id_rsa (0x0) debug2: key: /home/Administrator/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: start over, passed a different list publickey,password,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/Administrator/.ssh/id_rsa debug3: no such identity: /home/Administrator/.ssh/id_rsa debug1: Trying private key: /home/Administrator/.ssh/id_dsa debug3: no such identity: /home/Administrator/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: userauth_kbdint: disable: no info_req_seen debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: debug3: authmethod_is_enabled password debug1: Next authentication method: password Administrator@9.120.96.188's password: debug3: packet_send2: adding 48 (len 66 padlen 14 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting no-more-sessions@openssh.com debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Last login: Sat Sep 4 05:11:19 2010 from dtmoutbound20.in.ibm.com ]0;~ Administrator@windows-PC ~ $ logoutdebug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0 debug2: channel 0: rcvd eow debug2: channel 0: close_read debug2: channel 0: input open -> closed debug2: channel 0: rcvd eof debug2: channel 0: output open -> drain debug2: channel 0: rcvd close debug3: channel 0: will not send data after close debug3: channel 0: will not send data after close debug2: channel 0: obuf empty debug2: channel 0: close_write debug2: channel 0: output drain -> closed debug2: channel 0: almost dead debug2: channel 0: gc: notify user debug2: channel 0: gc: user detached debug2: channel 0: send close debug2: channel 0: is dead debug2: channel 0: garbage collecting debug1: channel 0: free: client-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1) debug3: channel 0: close_fds r -1 w -1 e 6 Connection to 9.120.96.188 closed. Transferred: sent 2056, received 2456 bytes, in 3.7 seconds Bytes per second: sent 557.6, received 666.1 debug1: Exit status 0 ]0;~ Administrator@xpvm4dev ~ $ exit exit Script done on Wed Aug 4 21:08:06 2010

vinsor wrote:

Actually.. we are trying some alternatives for openssh.. like cygwin contains opensssh as the ssh tool.. even that fails on w7 32-bit.. but works on XP,2008,w7 64-bit..