LITTLEBLACKDOG.COM

Stray Dog Joined: 31 Dec 2000 Posts: 60 Location: Portugal

I have been switching stuff around and now my BP6 is caseless. How do I get that bad boy to powerup? I have a power supply connected, HD, vid card, etc. Everything 'cept the case.

I figure I should put a jumper on, but I also don't want to fry the board, so this is more a "Is this right or will it screw up" post.

Thanks-

Butt Sniffer Joined: 24 Oct 2000 Posts: 1545 Location: USA

Not sure about puttin a jumper on it but all you need to do is have the two pins connect long enough for it to signal.

Dunnosquatt is my name,
tryin to figure out this shi* is my game.

Posted: Sat Jan 20, 2001 2:33 pm Post subject:

Quote:
How do I get that bad boy to powerup?

probably not the best way but i use a little button i got from radio shack attached to an old connector from an old AT case face.
But i have used a pair of scissors to bridge the two pins before.[ Surprised

)]

-------------------------------------------
Hey, Can you print out the Internet for me?

Big Dog Joined: 20 Oct 2000 Posts: 3689 Location: USA

Quote:

<BLOCKQUOTE id=quote>quote:

probably not the best way but i use a little button i got from radio shack attached to an old connector from an old AT case face.
But i have used a pair of scissors to bridge the two pins before. Clown Smile

<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote>

get a "reset" switch from a spare case. . . It has the same kind of sping loaded switch that atx power supplies use, I have one that I use whenever I suspect that I may have a bad switch, and it works Sweet-ASS-Sweet !

Blame is for people who need a reason to be pissed off !
-Brain

Butt Sniffer Joined: 24 Oct 2000 Posts: 1545 Location: USA

HEHE, damm a reset switch!!!! Now why didn't i think of that:?: [ Sticking out Tongue

]

Dunnosquatt is my name,
tryin to figure out this shi* is my game.

Quote:

Code: Select all

Quote: