LITTLEBLACKDOG.COM

Leg Humper Joined: 11 Oct 2003 Posts: 5997

Sheet treated flooring would be OK and cover with some NEW Lino. Wink

Posted: Mon Jun 18, 2007 5:09 am Post subject:

Okay sweetie,

I think I understand what you guys want then.

First the glue. Old fashioned hard work and sand paper. Chip off whatever you can and sand and then patch and repair like any wallboard project.

But you might look herehttp://www.lowes.com/lowes/lkn?action=howTo&p=HomeDecor/texturewalls.html&rn=RightNavFiles/rightNavHomeDecorfor some ideas on different ways to paint to make it look textured.

I am with Cheesemonger on a negative feeling about the sprayons and such - to me they just look like they are there to cover a badly built house. (no offense to anyone - just past experiences). The paints are fun to use and rich looking. my designer friend says "Designer Chic" lol.

I would put in a wood floor - in such a small space it would be inexpensive as you could find end lots. It is easy to upkeep and again "designer chic". They are easily laid over just about anything and would update any look.

Posted: Mon Jun 18, 2007 5:21 am Post subject:

Bob Villa says you should use "LIQUID NAILS Adhesive & Caulk Remover LN-595
The spot should first be scraped, then LN-595 should be applied to clean-up residue. " for the paneling adhesive.

Smile

EEps · Posted: Mon Jun 18, 2007 10:07 am Post subject:

thriftyjack wrote:
Bob Villa says you should use "LIQUID NAILS Adhesive & Caulk Remover LN-595
The spot should first be scraped, then LN-595 should be applied to clean-up residue. " for the paneling adhesive.

This stuff... Wink Smile

Quote:
Adhesive & Caulk Remover (LN-595)

Surface Preparation:
To ensure that the solvent in this product will not harm the surface being cleaned, test on an inconspicuous area before applying.

Product Application:
Apply remover to cover old adhesive or caulk. To remove fresh material, allow remover to penetrate 1 to 5 minutes, then scrape clean. To remove dried material or to clean tools, allow remover to set for 1 to 2 hours. Scrape clean with a putty knife. If necessary, reapply remover.

Clean-up:
Use soap and water.

EEps · Posted: Mon Jun 18, 2007 10:16 am Post subject: Re: Bathroom Remodel

fathertyme wrote:
BamZipPow wrote:
fathertyme wrote:
2) I pulled off some old wallpaper to reveal the old un-finished wall behind it. Anyone know what the easiest way to apply texture to such an expanse?!

Easiest way would be to pull the old drywall out if it's that beat up and put up new drywall. Tape and float the joints. Prime and paint.

ok, maybe I misspoke. When I said "unfinished" I meant that its bare drywall. unpainted, still its natural shade. No texture, nothing. So I don't need to pull the old drywall out, just prime and paint it, but its really FLAT and I'd like to put some texture on it (it seems to add to that "finished" look)

Okay...I see what you mean. There are subtle texture mixes you can put in the paint or using some spackle and a wet sponge (or an expensive roller) that you can create yer own patterns. Check with yer local hardware store or section. I would try to match it up with the "finish" you have with the rest of the bathroom but I'm gonna guess it's the "100 coats of old paint" look that you have now... Wink Smile

Just don't fergit one important step...prime the wall before you try it...or read the instructions first! Big Smile

Posted: Tue Jun 19, 2007 9:29 am Post subject:

You CAN put wood over the old lino. - warmer too.

PICs please? What does Je want? Smile