LITTLEBLACKDOG.COM

Cat Chaser Joined: 24 Oct 2000 Posts: 951 Location: USA

Are the old celerons multiplier locked? I'm talking celeron 333 up to 466.

-------------------------

Booyah grandma. Booyhah.

Posted: Thu Nov 02, 2000 11:11 pm Post subject:

Yep. I have a 300A Slot 1 processor and it is clock locked. I think that they were among the first that were truly clock locked. Many of the P2's before that you couldn't raise the multiplier, but you could lower it.

"Environment is everything - The Lion may be king of the jungle, but you airlift him to Antarctica and he is just some Penguin's Bitch" - Dennis Miller

Big Dog Joined: 20 Oct 2000 Posts: 3689 Location: USA

I have Dual 366's with a multiplier of 5.5 and a 66mhz bus

you can still raise the bus spead on them though. I run mine at 550 most of the time, with very few problems

-Brain

Brain@littlewhitedog.com

Posted: Thu Nov 02, 2000 11:29 pm Post subject:

Yeah, my 300a is a real classic. It will run 516 with an air cooled peltier on it. What a great chip, close to actually doubling its speed.

"Environment is everything - The Lion may be king of the jungle, but you airlift him to Antarctica and he is just some Penguin's Bitch" - Dennis Miller

Big Dog Joined: 20 Oct 2000 Posts: 3689 Location: USA

All I'm topping mine with is some big ol' FacAlpha's but they get me to the upper limit of the "El-Cheapo" ram I bought way back in the day.

-Brain

Brain@littlewhitedog.com

Posted: Thu Nov 09, 2000 10:34 am Post subject:

One of my systems is a celery 366@550. All I did was set the bus to 100. No voltage increases were needed. Never had one problem, and its been running seti almost 24/7 since new.

Butt Sniffer Joined: 24 Oct 2000 Posts: 1545 Location: USA

Su007, is that a flip chip design 366?
I have a slot1 366MHz celeron that will only get to an 83 MHz bus. 458 is all it can do..
Kinna disappointed me when i first got my hands on it. I also have a 400MHz slot1 celeron that will only go 75MHz bus...

One there can only be
and i'm not it. ò¿ò

Posted: Thu Nov 09, 2000 6:59 pm Post subject:

My dual FC 433s can only get to 83Mhz which gets me 540 with slightly better than stock cooling, but if I do anything CPU intensive the system gets unstable. I can run at 78Mhz without much problems unless it's a hot day outside which drives up the ambient temp causing the CPUs to get way too hot for me!

Rover
"...She went to the cupboard to get her poor dog a bone,
when she bent over Rover took over and gave her a bone of her own!"

Posted: Fri Nov 10, 2000 1:10 pm Post subject:

Quote:

Su007, is that a flip chip design 366?
I have a slot1 366MHz celeron that will only get to an 83 MHz bus. 458 is all it can do..
Kinna disappointed me when i first got my hands on it. I also have a 400MHz slot1 celeron that will only go 75MHz bus...

Yes, its the older version of socket 370. From what I remember, results varied alot by where the processor was made.. malay, philipines, etc.

Big Dog Joined: 20 Oct 2000 Posts: 3689 Location: USA

alot of the OC ability is the combination of the heatsink, and the thermal paste you are using (maybe even some Lapping if you're upto it)

my paste is getting old and nasty, so my system isn't always stable at 550, looks like it's time to clean it up, and slap on some arctic silver instead

There is NO spoon !
-Brain

Cat Chaser Joined: 24 Oct 2000 Posts: 951 Location: USA

actually, I'm gonna start with some GORB's then some TEC/water cooling action.

I'm in the process of building the water cooler now. Takin pictures as I go, so you can bet there will be an online guide. :)

check back for more details

----------------------------

Booyah grandma. Booyhah.